|
Introduction
ALL-100 supports device
programming for a variety of device types covering EPROM, EEPROM, Serial
PROM, flash, PLD/CPLD/FPGA, MPU/MCU, etc. Most of programmable devices in
DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA package types can be
programmed on a DIP48 Programming Module directly or through an appropriate
ADAPTER/CONVERTER.
ALL-100 features high-tech pin drivers to provide excellent programming
quality at high speed, high reliability and high expansion flexibility. All
pin drivers of ALL-100 are fully programmable to meet modern programming
/testing needs including newly released low voltage devices in the market.
A high speed USB port is provided to connect to the majority of notebook or
desktop PC runs on Windows 98 SE/Me/NT/2000 SP4/XP SP1/Server 2003. Multiple
units of ALL-100 working simultaneously are possible via tiered star USB to
achieve highest throughputs.
ALL-100 is a very powerful universal programmer which could be used either
with single socket Programming Module or with 8 sockets Gang Programmer
Module to save future expansion cost. ALL-100 is designed to help
engineering and production lines to tackle today’s challenges in device
programming.
Features & Benefits
xcellent Performance - Utilize flexible pin drivers to get accurate
waveforms,high programming speed plus over current protection, reverse
insertion detection, self diagnostic etc. ensures ALL-100's excellent
performance
Wide IC Coverage - Over 12,000 programmable
devices can be programmed covering EPROM, EEPROM, Serial PROM, flash, PLD/CPLD/FPGA,
MPU/MCU, etc. in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA etc. package
types
Inherit ADAPTER/CONVERTER from ALL-series
- Over 500 ADAPTERs, 150 CONVERTERs can be used with single site programming
module or Gang Programming Module to ensure your capital investment
retained.
Easy to Use - Runs on Windows. After
master read or file download from PC, user only needs to select (Blank
check, Program, Auto) function from Menu and then hit YES key on programmer
to start program function. Operation is very easy.
Multiple Units Working Simultaneously
- Via tiered star USB topology to achieve highest throughputs.
Release New Device Support via Internet
Weekly - Receive new device support S/W at no charge.
World Wide Service - Distribution
channel covers 35 countries worldwide. Your problem could be taken care
anywhere around the world.
Ideal for Engineering as well as
Production Environment - Wide device covering range, flexible future
expansion capability help users to achieve challenging time-to-market goal.
Specifications
Device
Support Pin Count : from 8 pins up to over 300 pins
Device Type: covering EPROM, EEPROM, Serial PROM, flash, PLD/CPLD/FPGA, MPU/MCU,
etc.
Device Contact Default - DIP48, Textool. Others - SOP, TSOP, PLCC,
QFP, MLF, SDIP etc. through optional CONVERTERs or ADAPTERs.
Max. Sockets in parallel 8 Sockets on Optional GANG Programming
Module.
Control 16 bits high-speed controller with big
sized FPGA & CPLD.
Interface Port 1x USB port.
Data Transfer Rate USB 1.1 : 12 Mb/S USB 2.0 : 480 Mb/S
Max.Sites in Parallel UP to 8 programmers working simultaneously
via tiered star USB.
Functions Load file, Read Master, Program, Verify, Auto, ID
Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit,
Function Configuration, Self Test.
Host Computer Requirements
-
An Intel Pentium or
compatible processor with 64MB of RAM.
-
At least one USB port
available (V1.1/ 2.0).
-
20 MB free hard disk space
with Windows 98 SE/Me/2000 SP4/XP SP1/Server 2003 operating system.
-
CD-ROM Drive.
Power AC voltage - 100 - 240 VAC.
Frequency - 50 - 60 Hz
Power consumption - 50W
Dimension L x W x H - 260mm x 150mm x
100mm.
Weight 4 KG.
Safety Standards CE Approved.
|
