[ ] [] [] [] ] [ ] [] []

LCR
Z9216
  • LCR

  • 5

  • 0,05 %

  • 100, 120,1, 10, 100

  • RS-232.

  • Display
    - Mode  : Auto, R+Q, L+Q, C+D, C+R
    - Addition Circuit  : Series, Parallel
    - Display Variables : Measurement Value, Diversion, % Diversion, Bin Number Diversion and % Diversion are calculated values.
    - Average Measurement Range :
     Average values after 2 ~ 10 times measurement
     R+Q : R, 0.0001~ 2000M   Q, 0.00001 ~ 50
     L+Q : L, 0.00001uH ~ 99999H   Q, 0.00001 ~ 50
     C+D : C, 0.0001pF ~ 99999uF   D, 0.000001 ~ 10
     C+R : C, 0.001pF ~ 99999uF   R, 0.00001 ~ 99999K 
     
  • Measurement Condition
    Frequency  : 100Hz, 120Hz, 1KHz, 10KHz, 100KHz  Accuracy : 100ppm
    Voltage : 0.1V, 0.25V, 1Vrms
    Speed : Slow, Medium, Fast
    Frequency    |    Slow    |     Medium  |     Fast   
     100KHz           2.8/sec        14/sec       28/sec
     10KHz             2.8/sec        14/sec       27/sec
     1KHz              2.7/sec        13/sec       24/sec
     120Hz             0.7/sec        2.8/sec       7/sec
     100Hz             0.6/sec        2.4/sec       6/sec

    Range Selection : Automatic and Manual
    Circuit : Series and Parallel Circuit
    Triggering :  Continuous, Manual or RS232C, GPIB Handler External Trigger via Interface
    Bias Voltage : Internal 2.0 VDC 2%   External 0 ~ +40VDC(fused @0.25A) 
    Connection : 4 Circuits BNC Connection
    Protection Circuit : Built-in Protection Circuit when charged condenser measurement (1 time)
    Null Calibration :Open and Short Correction and Compensation
     

  • Operation  :  0~50, below RH 80% 30 min. preheating 23ɱ5

  • Operation Voltage : 100V, 120V, 220V, 240V 10% 50/60Hz

  • Dimension & Weight :  363(W)×109(H)×386(D)mm, 5.8kg

  • Option
    GPIB Handler Interface : IEEE-488 Interface and Handler Interface
    Kelvin Clips  : When connection with different Fixture
    MD Tweezers :  Surface Mount Fixture Connection
    Radial Fixture : Radial or Axial Type Fixture Measurement (Direct Connection to LCR Meter)

  • Basic Accessories
    .Power Cord 1EA
    .Fuse 2EA
    .Manual 1EA

  • Radial Fixture : Radial or Axial Type Fixture Measurment (Direct Connection to LCR Meter)