Programs high-density Flash
memory devices at near theoretical minimum programming times
Standard 48 pin universal
pin-drivers come with universal package adapters to support all type of
devices in same package with a single adapter. No adapters are needed
for DIL devices. Universal adapters ensure rapid algorithm update.
Device-specific adapters are also available for devices above 48 pins
that are amounted on DIL48 module. Down to 1.5V low voltage devices are
supported directly thanks to the DAC controlled I/O levels.
Advanced hardware features
minimized Bounce noise. Only IC manufacturers approved algorithms are
adopted. High yield rates are guaranteed for all devices including low
voltage, critical and second-hand devices. ±5% and ±10% Vcc Verification
promises programming reliability.
Supports 9000+ devices from up to
90 IC manufacturers including MEMORY、MCU、PLD.
Free life-time software update.
Pin continuity and wrong chip
insertion check prevent chips from accident damage.
Over-current and over-voltage
protection for programmer hardware.
Standard TTL/CMOS logic ICs and
user-defined logic ICs can be tested and recognized.
Software supports WINDOWS
Operator friendly control
software combines many powerful functions with ease of use. Project
minimizes the whole process of device selection, file loading, device
configuration setting, operation option, batch file setting etc. to a
single step. History of device selection and file loading simplify
operation. Batch command combines device operations like program, verify,
security into a single command at any sequence. Auto-Start start Batch
command automatically as soon as the chip is detected to be inserted in
the socket properly. Serial number can be generated and programmed into
devices automatically in anyway customer specified. The correct device
type will be suggested according to the actual ID read when a mistake
type is selected. With help of the open API user can even change the
buffer content from chip to chip. Recognizes file formats and detects
large file offset automatically.
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory（NOR and NAND）, BPROM, NVRAM, PLD, Firmware
HUB,Microcontroller, MCU, Standard Logic.
DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP,TSOP, TSOPII, SOP,
PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP etc.
PC Interface: USB
Standard Package: Main
unit, DIL48 Module, AC adapter, CD-ROM, User’s Guide, USB Cable
Option Accessories: Package Adapter